HEATED MOTORCYCLE GLOVES GERBING XR12
EXCEPTIONAL 20% DISCOUNT! LAST PIECES
Supplied with 12V junior-controller and battery connection cable
The 12 Volt Hybrid motorcycle gloves XR12 for direct connection to a 12V battery of a vehicle.
Robust with extra knuckle protection, lightweight and high-quality soft leather for a nice fit.
Flexibly by various uses.
Direct connection to your vehicle for longer trips or wirelessly with the smaller rechargeable batteries for short distances.
Continuous heat while riding :
-
Direct connection to the vehicle battery using the battery cable CXPP
-
With the included Junior controller JC-12V you can control the heat in 4 levels.
Within a few seconds you will feel the warmth of the electrically heated glove.
Glove features :
-
The XR12 heated glove is made of supple, drum-dyed premium aniline leather.
-
Extra , high protective upper hand.
-
Durable stainless steel heating wire Microwire® , not noticeable in the glove.
-
Heating over the entire length of the fingers and the upper side hands.
-
Hipora®Lining , breathable and protection against water and wind.
-
Thinsulate® insulation for extra warmth and comfort.
-
Cuff opening closable by zipper for rechargeable batteries B12V-1400
-
Adjustable wrist strap with Velcro closure.
Specifications :
-
Microwire®Technology , very good and uniform heat conduction.
-
12 Volt power source (motorcycle, scooter, quad, car, plane).
-
Power consumption : 27 Watts / 2.2 Amps.
-
Surface T ° : 5°C at -2°C to 2°C
-
Available Sizes : XXS - XXXL
-
12Volt heated gloves Gerbing are designed to produce sufficient heat at temperatures of -20°C and with a speed of 120 Km / h.
-
As the outside temperature rises ,12V gloves will be warmer.
-
From +5°C , you can risk red spots or blisters caused by too hot gloves.
-
Check your skin regularly and do not let the temperature rise to high.
-
Use your temperature controller in time !
OPTIONAL : for use without connecting to the vehicle
-
With a separate, rechargeable 12V battery in connection with your gloves through a long Y-cable CXY.
-
Batteries : you can choose the B12V-5200 KIT or powerful B12V-8000 KIT (KIT = battery + remote + charger).
OPTIONAL: for wireless use
-
Wear the motorcycle gloves fully wireless through 2 separate small batteries B12V-1400 KIT.
-
The rechargeable batteries you can slide easily into the cuff of your glove.
Note : the junior controller can not be used in conjunction with a separate, rechargeable 12V battery
Battery capacity / heat duration in connection with gloves |
B12V-1400 |
B12V-5200 |
B12V-8000 |
Red = +- 1 hour |
Level 1 = +- 2.5 hours |
Level 1 = +-5 hours |
Yellow = +- 2 hours |
Level 2 = +- 4 hours |
Level 2 = +- 8 hours |
Green = +- 3 hours |
Level 3 = +- 7 hours |
Level 3 = +-14 hours |
The duration of the rechargeable battery may vary depending on the outside.
Capacity decreases as it gets colder.
Below 0 ° C the battery will have a capacity of about 80%.
Maintenance batteries : READ MORE
Warranty Gerbing : READ MORE