Set: HEATED INNER GLOVES GERBING L12 + Y-kabel-12V-battery
Specially designed to be worn under existing gloves.
Through the thin Lycra fabric they are flexible and multifunctional.
Wear under under work gloves - motor - scooter gloves with direct connection to the battery of the motor vehicle or use them under work gloves, mittens or other unheated gloves with the separate, rechargeable battery.
Continuous heat while riding :
-
Direct connection to the vehicle battery using the battery cable CXPP.
-
With the included Junior controller JC-12V you can control the heat in 4 levels.
Within a few seconds you will feel the warmth of the electrically heated gloves.
Glove features :
-
Firm fit by using stretch Cordura fabric.
-
Stainless steel, sustainable heating Microwire® , not noticeable in the glove.
-
Heating over the entire length of the fingers and the upper side hands.
-
Recommended to wear under non-heated gloves.
-
Adjustable neoprene wrist strap with Velcro closure.
-
Included with Gerbing glove Liners L12 supplied : Battery Connector + Junior Controller
Specifications :
-
Microwire®technology , very good and uniform heat conduction.
-
12 Volt power source (motorcycle, scooter, quad, car, plane).
-
Power consumption : 27 Watts / 2.2 Amp.
-
Surface T ° : 5°C at -2°C to 2°C
-
Available Sizes : XXS - XXXL
-
12Volt heated gloves Gerbing are designed to produce sufficient heat at temperatures of -20°C and with a speed of 120 Km / h.
-
As the outside temperature rises ,12V gloves will be warmer.
-
From +5°C , you can risk red spots or blisters caused by too hot gloves.
-
Check your skin regularly and do not let the temperature rise to high.
-
Use your temperature controller in time !
SET: for use without connecting to the vehicle
-
With a separate, rechargeable 12V battery in connection with your gloves through a long Y-cable CXY.
-
Batteries : you can choose the B12V-5200 KIT or powerful B12V-8000 KIT (KIT = battery + remote + charger).
Note : the junior controller can not be used in conjunction with a separate, rechargeable 12V battery.
Battery capacity / heat duration in connection with gloves |
B12V - 5200 |
B12V - 8000 |
Level 3 : 2.5 hours |
Level 3 : 5 hours |
Level 2 : 4 hours |
Level 2 : 8 hours |
Level 1 : 7 hours |
Level 1 : 14 hours |
The duration of the rechargeable battery may vary depending on the outside.
Capacity decreases as it gets colder.
Below 0 ° C the battery will have a capacity of about 80%
Maintenance batteries : READ MORE
Warranty Gerbing : READ MORE